First 3 way bookshelp build using peerless drivers

[Subbiya]

Hi Friends,
From long ago, I was much interested in building 3 way speaker DIY project but after doing some research and gathering some knowledge, I found it is hard to build a 3 way DIY design especially the testing part needs more knowledge but I found a project in this forum which was build by arunvenkats and along with the help of local peerless dealer in chennai, I decided to go with arunvenkats's plan https://www.hifivision.com/threads/3-way-sealed-speaker.97885/

I have done slight modification on the driver selection and crossover components, basically I'm not a EEE guy but gathered some knowledge on calculating crossover components, and requires help from all of you in each stage until I complete this project.

Here is my driver selection
Woofer: https://electrocarts.in/product/peerless-by-tymphany-woofer-hds-p830869/
Mid: https://electrocarts.in/product/peerless-by-tymphany-full-range-fsl-0512r01-08/
Tweeter: https://electrocarts.in/product/peerless-by-tymphany-bc25tg15-08-silk-dome-tweeter/

Here is the modified crossover design: