Thank you, Phew. Will look into it.
I would say build one yourself using 10/12 awg.The cable that came with the Schiit Aegir is 18 AWG. I think the thickness is slim, and I believe the power amp can benefit from a thick cable with shielding. Kindly suggest me one. The length required is about 1 metre, and the budget is around 6K. I unfortunately don't have a high budget for high-level cables.
How good is Mogami Pureline V5?
Thanks in advance
Thank you. I’m not a DIY person unfortunately. Still, I will explore the options.
The last few meters of uber expensive power cable is not a filter like aquaguard. It will pass all the junk that is present in kilometers of cable leading to your house - Unless you have a thermal/nuclear power plant next to your music room with the thickest power cable on planet, with a super accurate governor to control the speed of the steam turbine to give you exact 50 Hz and with each cable leading right upto the amplifier and with thickness of few meters of diameter. Having said that, whatever rocks your boat. Placebo is real. You can have RO filter after the aquaguard followed by another aquaguard and then Hema Malini talking about the plus of RO Kent, if that makes one feel comfortable. But then putting a real filter to remove the bacteria (EMI noise) will increase the impedance the same way it slows down the water flow. And anything that impedes the current (water) flow impacts the dynamics. Also this electric network leading upto your amp, is in series (not parallel). The portion of conductor with the worst property will dictate the quality
Hmm , nice try with electric vs water supply analogy. Can you further elaborate your point based on any solid electrical engineering background? Or should we divert our discussion from electric supply to local municipal water supply issues? Believe me I can answer that part too, provided it doesn't breaks the forum rules
If you talk about cables, take it from me that someone will take it the wrong way
. Especially if one has spend few grands without learning about electrical fundamentals. And there is something known as faith. No way you can argue against that. Other than the Ohm's law, the laws of many nations will be pitted against you and you cannot win that battle. Not yet. Going against that will be blasphemy unless you are in New Zealand or Canada.You have posted something from ASR which is an anathema of many who believe in expensive cables. dacs, amps, etc
building a cable is not rocket science. You can connect with me on IM to build a cable yourself (in case you want to). Else buy something that is thick or comes up in the classifieds. Save your money in making a good cable from the AMP to your speaker.Thank you. I’m not a DIY person unfortunately. Still, I will explore the options.
If you talk about cables, take it from me that someone will take it the wrong way
You don't need a specialist background to have common sense. Its a simple question I have asked and if a diversion helps you in answering the same, go ahead by all means but make sure you stick to the question I have asked and not go reciting chapters from books/google.
Sure. I run belden 8477 between my amp and speaker. I believe, it is more than sufficient
My reply was for @mbhangui comments , not yours.
Make sure you book an appointment with a solid ophthalmologist because it was my post you quote.
