Suggestions for configuring Yamaha HTR 2067 + TAGA Harmony 606 SE

[avfriend]

Hello everyone,

I have a Yamaha HTR 2067 AVR and TAGA Harmony 606 SE speakers.

This is the speaker spec:

Floorstanding Speakers

Crossover points 650Hz, 4.5kHz
High-Frequency Driver: 25mm (1"), TWG faceplate
Midrange Driver: 133mm (5.25")
Bass Driver: 2 x 165mm (6.5") (16.5 cm)
Recommended Amplifier Power: 20-150W
Frequency Response: 36Hz-25KHz
Impedance: 6 ohm
Sensitivity: 91 dB

Center Speaker

Crossover points 4.5kHz
High-Frequency Driver: 25mm (1"), , TWG faceplate
Bass / Midrange Driver: 2 x 102mm (4")
Recommended Amplifier Power: 20-100W
Frequency Response: 52Hz-25KHz
Impedance: 6 ohm
Sensitivity: 88 dB

Surround Speakers

Crossover points 4.5kHz
High-Frequency Driver: 25mm (1"), TWG faceplate
Bass / Midrange Driver: 102mm (4")
Recommended Amplifier Power: 20-100W
Frequency Response: 52Hz-25KHz
Impedance: 6 ohm
Sensitivity: 88 dB

There is a Sony Sub Woofer at 140 watts at 3 ohms, 80 Hz, 10% THD

The input for AVR is ASUS O!Play Mini.
Video part is Samsung Plasma TV.

Can someone please suggest/guide on setting this up for optimal movie viewing?

Thanks in advance.
Regards.

 

[Naveenbnc]

are you having any problems with this setup ?? If you have YHT 196 operators manual, please check that....you can do most of the settings yourself.... You can download it online too ....