analogadikt
Well-Known Member
A friend picked this up as a non working unit (it was cheap) and brought it to me for revival. The platter would not turn nor was it ready to get out of the chassis. The tonearm was in nearly two pieces
It took about half an hour to free up the jammed linkages etc. and get all functions of the tt working correctly with the platter going rock steady at perfect speed.
The tonearm took about five hours, made a new coupler for the stub holding the counterweights and some problems of the headshell coupler were rectified.
My friend is a happy boy now, enjoying his vinyl
A full service and a proper setup shall be done in a few days.
Regards,
It took about half an hour to free up the jammed linkages etc. and get all functions of the tt working correctly with the platter going rock steady at perfect speed.
The tonearm took about five hours, made a new coupler for the stub holding the counterweights and some problems of the headshell coupler were rectified.
My friend is a happy boy now, enjoying his vinyl
A full service and a proper setup shall be done in a few days.
Regards,