Banana plug doesn't fit : Dali zensor 3

[Kumar442244]

Hello fellow members,

Need some help in adjusting banana plug with Dali 3.

Bought these but doesn't fit in the speaker.

Kindly advise.

Set of 4 Banana Plugs - Gold Plated -Screw Type Install:Amazon:Electronics

 

[balajeem]

Can you pls elaborate when you say it doesn't fit in ? Thought they are standards ..
are you having some cap like you have in speaker terminals in AVR ?

 

[Deleted member 38504]

Please remove the plugs from the speakers. The plugs will be a tight fit nevertheless.

 

[Kumar442244]

Please remove the plugs from the speakers. The plugs will be a tight fit nevertheless.

http://www.hifivision.com/attachment.php?attachmentid=23255&stc=1&d=1497286629

Image with and without the screws.

Still doesn't help.

Isn't there a standard size of the banana plug?

 

[Kumar442244]

Can you pls elaborate when you say it doesn't fit in ? Thought they are standards ..
are you having some cap like you have in speaker terminals in AVR ?

Just posted an image

The issue is that the banana plug doesn't enter the speaker connector.

Not sure of the standerd size though.

 

[Kumar442244]

Please remove the plugs from the speakers. The plugs will be a tight fit nevertheless.

Hey celeater,

Can see that u are using Z3. Can u plz post rear image of the speaker with and without the connection if u r using the banana plug.

 

[Deleted member 38504]

http://www.hifivision.com/reviews/66116-my-dali-zensor-3-initial-impressions-4.html

See this my friend.... I also had issues....it's just a nice tight fit.

See page 4 of the above thread.

 

[master007]

I agree. It's a tight fit.
Just unscrew the connector at the back (as much as possible but do not remove it completely), it'll loosen up the gap.
Insert the banana plug (yeah still it'll be a tight fit) and then again tighten the screw.

 

[hifipal4all]

Most speakers comes with a dust protection cap on the binding posts like this (Red & Black coloured) ...

Speaker Input Terminal Cup Insulated Gold Binding Post + Mount Screws - Paradigm | eBay

You should remove the caps to use a banana plug ... Any standard 4MM banana plug would fit. Few banana plug pics for sample .....

QED SCREWLOC ABS 4MM Banana Plug - 4 Pack - FutureShop.co.uk

5pairs 4mm Gold-plated Banana Plug connector for Speaker cable

20pcs 24K Gold Plated BFA-Z 4mm Banana Plug Dual Screws Speaker Cable Connectors

Cheers

 

[Kumar442244]

Thanks everyone.

Was able to install it.