ukjeyaraj
Well-Known Member
Where did you buy the crossover from? What is the cost for the pair of crossover?
DIY Floorstanders with peerless drivers - 3 way
- Thread starter thenvk
- Start date
ebay.com. cost me 25 usd per piece+shipping. Final landing price 3.5k per pair, including customs.
20K including everything.
1600*4== woofers
1250*2== Tweeters
850*2=== Mid
4000==Xover
3000== Wood+carpenter
2000== Others..
Not sure whether these are a decent competetion to the professional 20K towers are not? Let few guys audition and then I can come to a conclusion.
For now, I achieved what I needed. Hence very happy.
prosenjit
New Member
great show brother...its a heavenly feeling enjoying items you made yourself...
please share your music source
please share your music source
Please share in this thread so that people can use as a reference.
You can reach them using
[email protected]
or
09821161535.
Now DIYAUDIOCART is an official re seller of peerless drivers. You can buy on line in their website as well.
diyaudiocart
I think one of the recent calls to the Jitubhai was routed to the above dealer ( diyaudiocart).
Thats wonderful...so DIYAUDIO CART is making waves...i definitely have some things to order from them, now i see they have cross overs as well..have to check if those crossovers work for my project.
Hello All,
First of all i should thank thenvk!! for the audition of his towers..
First time i have auditioned some DIY Stuff.
The towers he made sound superb..and they definitely met his requirement, THUMPING BASS.
He shared his experience on the DIY route.
But still i would say the itch is still inside me, i want to test and taste this route.
The toughest part is the Crossovers as per his experience, even i felt that after so much reading.
So I think i would first start off with the bookshelfs, if that is successful let me go with the next one's.
Thanks,
hari
First of all i should thank thenvk!! for the audition of his towers..
First time i have auditioned some DIY Stuff.
The towers he made sound superb..and they definitely met his requirement, THUMPING BASS.
He shared his experience on the DIY route.
But still i would say the itch is still inside me, i want to test and taste this route.
The toughest part is the Crossovers as per his experience, even i felt that after so much reading.
So I think i would first start off with the bookshelfs, if that is successful let me go with the next one's.
Thanks,
hari
Hari, thank you for your comments.. Let me know if you need any help from me.Hello All,
First of all i should thank thenvk!! for the audition of his towers..
First time i have auditioned some DIY Stuff.
The towers he made sound superb..and they definitely met his requirement, THUMPING BASS.
He shared his experience on the DIY route.
But still i would say the itch is still inside me, i want to test and taste this route.
The toughest part is the Crossovers as per his experience, even i felt that after so much reading.
So I think i would first start off with the bookshelfs, if that is successful let me go with the next one's.
Thanks,
hari
but as I suggested for HT set up front speakers, you don't need the towers with woofers as you will have dedicated sub.
alankar1977
Member
cool stuff
Excellent stuff thenvak
Your work was very inspiring for people like me.
Also got inspired by couple of DIY speaker postings & have decided to started my own building. Here are the spec. I am an accountant & have no tech. knowledge.
started the project by deciding 3 Way speaker so that I could adjust the tone as I like lisining to vocal music also.
Took Bijin' (diyaudiocart) help in finalizing the below.
1. Peerless - 10" Paper Cone Woofer - SB25NP - Woofer
2 Peerless - 25mm Fabric Dome Tweeter - SR10DT - Tweeter
3 Wintek - Passive 3-Way Crossover - XOver
4. Peerless - SK130 - Midrange
got the delivery of Drivers (never know it is called driver) today.
I have NAD 304 Amp
Sony CDP-CE315 CD player
Akai Bush 18 Band equiliser
Currently using my old Sony 3 way speakers (Midi system).
please share your contact no , so that I can take some guidance from you.
Thank You.
Ananth - 9900144315
Your work was very inspiring for people like me.
Also got inspired by couple of DIY speaker postings & have decided to started my own building. Here are the spec. I am an accountant & have no tech. knowledge.
started the project by deciding 3 Way speaker so that I could adjust the tone as I like lisining to vocal music also.
Took Bijin' (diyaudiocart) help in finalizing the below.
1. Peerless - 10" Paper Cone Woofer - SB25NP - Woofer
2 Peerless - 25mm Fabric Dome Tweeter - SR10DT - Tweeter
3 Wintek - Passive 3-Way Crossover - XOver
4. Peerless - SK130 - Midrange
got the delivery of Drivers (never know it is called driver) today.
I have NAD 304 Amp
Sony CDP-CE315 CD player
Akai Bush 18 Band equiliser
Currently using my old Sony 3 way speakers (Midi system).
please share your contact no , so that I can take some guidance from you.
Thank You.
Ananth - 9900144315
Hi Ananth,
Good something again from hyderabad...!!
I have done a build using peerless drivers and amplifiers made by Eight Audio.
The performance is very good..so far.
This guy Eight Audio has done Xovers for me, and amplifiers.
You can come for audition any time on saturdays.
I can give Contact number of the Eight Audio guy. He will be of great help for your project. Even members like Goldyrathore can give lot of guidence to you.
My project idea was given by Goldy..i have met thenvk auditioned his speakers as well. I felt so happy this was the first time i was listening to DIY stuff.
I wish Thenvk,Goldy and you and infact all HFV members to audition my speakers.
But one thing is sure..once your project is complete and you start listening to it..you will not listen anything other than that.
All the very best..!
Thanks,
Hari
Good something again from hyderabad...!!
I have done a build using peerless drivers and amplifiers made by Eight Audio.
The performance is very good..so far.
This guy Eight Audio has done Xovers for me, and amplifiers.
You can come for audition any time on saturdays.
I can give Contact number of the Eight Audio guy. He will be of great help for your project. Even members like Goldyrathore can give lot of guidence to you.
My project idea was given by Goldy..i have met thenvk auditioned his speakers as well. I felt so happy this was the first time i was listening to DIY stuff.
I wish Thenvk,Goldy and you and infact all HFV members to audition my speakers.
But one thing is sure..once your project is complete and you start listening to it..you will not listen anything other than that.
All the very best..!
Thanks,
Hari
theironhorse
Well-Known Member
Hello Hari
Thank you
I am from Mysore, but I work in Bangalore
if you have any contacts in Bangalore who builds the cabinet , it would help me a lot.
I got the drivers delivered now.
Regards
Ananth
Best bet PM Antony...!! for cabinets building or any help on DIY. he can guide you.
For excellent sound that won't break the bank, the 5 Star Award Winning Wharfedale Diamond 12.1 Bookshelf Speakers is the one to consider!
Similar threads
