what mc catridge should i buy

[brahmam]

i have thorens 190-2 with stock ortofon mm catridge . i want to replace with good ( high-end ) mc catridge. suggestions for suitable one.

 

[rajeshmehendiratta]

Budget

 

[brahmam]

around rs 30000

 

[jls001]

Check your tonearm specs first. Most MCs are low compliance and need a matching tonearm (high mass) to work optimally.

Next, check your phono preamp specs too. The gain of the phono preamp will decide the lowest output cartridge you can use.

 

[soundbuff]

Please check the tonearm mass. The importance of a proper tonearm mass and cartridge compliance match cannot be emphasised enough. If the tonearm is heavy (Above 12 ) only then go for the Denon 103. If its medium mass (8-10) go for the Denon Dl 110. If its on the lower mass side (<8), go for the Denon 103. All are at different price points, the least expensive is the dl110. Each has a different compliance to match the tonearm.
I would say go for the DL 110 for starters. It has the advantage of a high output and is a lovely cartridge.