Norge 1200 Power Amp review

Join Amazon Prime
V

vin_eme

Active Member
Joined
Apr 15, 2010
Messages
187
Points
43
Location
Bangalore, India
Frens,

i dont know if i am lucky or its my karma. I was looking for a Pre-Power for fren/colleague, pls refer my prev thread (Norge Concerto Gold or Norge Mosfet 2000). Then i came across this new pre-power from Norge (Norge 1200 Professional Pre & Power Amp). I decided let me get the power amp and build an SSP pre for him.
Ordered the power 1200 at arnd 16k from Pranab. Pls find some of the pics.

But the unfortunate part was that my fren had to leave abroad for long term. He asked me to use it till he returns. :clapping:

Connected amp to my speakers with SSP pre, its a very natural sounding amp. Heavily built and have ample power to drive. Some pics

Front & Back profile
20120925210743.jpg

20120925210644.jpg


Heavy Power supply & Caps
20120925211458.jpg

20120925211449.jpg


Spk Protection ckt
20120925211507.jpg


Amp Board
20120925211441.jpg

20120925211423.jpg


cheers,
Vincent
 
Nice.....lucky you!!

How does the norge power amp compare to other amplifiers in a similiar price range.....marantz, NAD etc?
 
Hi Vincent,

Pl post your listening impressions and what speakers did you pair them with.

N.Murali
 
apk said:
Nice.....lucky you!!

How does the norge power amp compare to other amplifiers in a similiar price range.....marantz, NAD etc?
Click to expand...

Apk,

many audio gurus in this forum say that the sound signature of Norge is similar to NAD. Since i dont have a NAD, i will not be able to comment.

~Cheers
 
murali_n said:
Hi Vincent,

Pl post your listening impressions and what speakers did you pair them with.

N.Murali
Click to expand...

Murali, this is currently paired with my Wharfs 9.5. I tried to run this directly from my source (OPPO BDP95 and also my irivier H140). Sounds natural and there's no coloration as such. But when i added the SSP in between, it does elevate the sound signature, more airiness, soundstage & crispness. So a PRE IS A MUST in the audio chain.
Also this is the first time am trying a Norge.

cheers,
Vincent.
 
Last edited:
vin_eme said:
Murali, this is currently paired with my Wharfs 9.5. I tried to run this directly from my source (OPPO BDP95 and also my irivier H140). Sounds natural and there's no coloration as such. But when i added the SSP in between, it does elevate the sound signature, more airiness, soundstage & crispness. So a PRE IS A MUST in the audio chain.
Also this is the first time am trying a Norge.

cheers,
Vincent.
Click to expand...

Well i have a Sonodyne stereo power amplifier - SPA 202... Very powerful i must say.... (130W clipping in to 8 Ohms & 200W clipping in to 4 Ohms/ each channel) But it is rated 575 VA... How much does this translate in to watts ? Any idea....

Also i planning to add this Norge power amplifier 1200 for my center speaker..... Few doubts though...

Since this is a stereo power amplifier and i intend to use it for my center channel speaker, what happens to the other channel which is not used ?

Will it consume the same power even if one channel of power is not used ? Sorry if i sound really dumb..But just trying to get it clear....
 
Hi vincent,

There is enough space inside the cabinet that a SSP Preamp , CNC Phono stage along with remote volume control and selector circuit can be added, of course 2 holes less than 10mm have to be drilled for the volume pot and the IR remote window.

Just my 2 cents.

N.Murali
 
elangoas said:
Well i have a Sonodyne stereo power amplifier - SPA 202... Very powerful i must say.... (130W clipping in to 8 Ohms & 200W clipping in to 4 Ohms/ each channel) But it is rated 575 VA... How much does this translate in to watts ? Any idea....

Also i planning to add this Norge power amplifier 1200 for my center speaker..... Few doubts though...

Since this is a stereo power amplifier and i intend to use it for my center channel speaker, what happens to the other channel which is not used ?

Will it consume the same power even if one channel of power is not used ? Sorry if i sound really dumb..But just trying to get it clear....
Click to expand...

Hi elangoas

Why dont you consider something from the emotiva stable :

Amplifiers | Emotiva Audio | High-end audio components for audiophiles and videophiles, spanning 2-channel music systems, as well as 5.1 and 7.1 home theaters. Products include multichannel amplifiers, stereo amplifiers, and monoblock amplifiers, as

Just my 2 cents.

N.Murali
 
Hi vincent,

For the SSP Pre and CNC Phono consider nothing less than 49990 or 1612 OPamps. From my experience there is nothing to beat these opamps. BTW what opamp are you using.

N.Murali
 
elangoas said:
Well i have a Sonodyne stereo power amplifier - SPA 202... Very powerful i must say.... (130W clipping in to 8 Ohms & 200W clipping in to 4 Ohms/ each channel) But it is rated 575 VA... How much does this translate in to watts ? Any idea....

Also i planning to add this Norge power amplifier 1200 for my center speaker..... Few doubts though...

Since this is a stereo power amplifier and i intend to use it for my center channel speaker, what happens to the other channel which is not used ?

Will it consume the same power even if one channel of power is not used ? Sorry if i sound really dumb..But just trying to get it clear....
Click to expand...

Elango,

the way it works is, till you put a load onto the output and a signal is driven into the amp, the power consumption will be at bare minimum. So if you are using only one channel, the power cosumed will be for that channel alone. The other idle channel will consume bare minimum
 
Hi elango,

I think there are no dealers in India for emotiva as of today . They sell only thro their website. The transportation may cost 30-40% more if imported. You can email them a query and they are very prompt in responding. As for auditon I can show you their mini a X 100 power amp which I am using in my stereo set-up.

N.Murali
 
vin_eme said:
Elango,

the way it works is, till you put a load onto the output and a signal is driven into the amp, the power consumption will be at bare minimum. So if you are using only one channel, the power cosumed will be for that channel alone. The other idle channel will consume bare minimum
Click to expand...

Thanx for the clarity buddy...An other question...

How much is 575 VA in watts ? I googled, but could not get a conclusive number...Hence the question...
 
murali_n said:
Hi vincent,

For the SSP Pre and CNC Phono consider nothing less than 49990 or 1612 OPamps. From my experience there is nothing to beat these opamps. BTW what opamp are you using.

N.Murali
Click to expand...

Murali,

am already on opamp Roll. Started with OPA2134, NE5532, LM4572. Today am recv 49990 from Sachin..Planning to try AD8066AR, OPA2107 as well. Let me see how it goes.
 
This is very nice Amp. I have doctored one and its VFM. It seems Bajaj Uncle added speaker protection and good PS caps. +1.

Not to say it sounds clean and detailed.
 
Wharfedale Linton Heritage Speakers in Red Mahogany at a Special Offer Price
Wharfedale Linton Heritage Speakers in Red Mahogany finish at a Special Offer Price. BUY now before the price increase.

Similar threads

S
A review on Fosi Audio SK01 Headphone Amp & preamp
Replies
2
Views
5K
Shammi Dang
S
S
Norge Concerto Gold 1000 Review ( An underestimated Brand)
5 6 7
Replies
120
Views
45K
Shammi Dang
S
sandeepsasi
Torvin Grandiose: An Ownership Experience
2
Replies
28
Views
27K
Sabin jose
Sabin jose
G
Yamaha Yht 299 versus Norge pre/ Power amp 1200 with Norge Tower spk Mk II
Replies
12
Views
3K
hildebrand
H
denom
Hot Scoop ! Norge Pre-Power Exclusive 1st Look & Review
2 3 4
Replies
68
Views
20K
spirovious
spirovious
Back
Top