Custom made peerless BS, priced for newbies?

[kaushik]

High End, Custom made, Home Theater and Bookshelf speakers - Chennai - Electronics - Koyambedu

chennai guy is making peerless BS speakers , plz cntact for price

 

[yuvaraki]

any idea bout the model #s for the drivers used so that we know how much of premium we are paying for these speakers?

 

[spirovious]

PEERLESS 830600 4 ohm driver,made in Denmark.

 

[kaushik]

guys the ad site allows contacting the makers and it free ( not the speakers !!) .

why not shoot Q list to him ..

Disclaimer :
* I have not tested the speakers .
* I have no link with the seller and also dont have price info on the speakers


However , this pic says 15k ;(

 

[magma]

for a newbie or even an avid audio listner on a budget
i have found nothing better than the speaker we demoed at the mumbai meet from DNM

for 8-9 k odd i dont think ive ever heard a speaker better
i personally like it better than the entry level warfedales

 

[trittya]

for a newbie or even an avid audio listner on a budget
i have found nothing better than the speaker we demoed at the mumbai meet from DNM

for 8-9 k odd i dont think ive ever heard a speaker better
i personally like it better than the entry level warfedales

Hi there, Ali Bhai
Are you talking of these?
http://www.dnmaudio.com/big_img/speaker_810.html
I tend to agree.

Also there are many other custom-builders around like FM Hari Iyer (can be contacted via PM here on the forum) and Vikram Joshi of Raaga Prosound
http://mumbai.quikr.com/Hi-End-Home...hoice-Thane-Dombivli-Mumbai-W0QQAdIdZ73407717

http://www.esuppliersindia.com/raaga-prosound/aboutus-p3327326-u2829002-swa.html]About - Raaga Prosound

I have no interests in recommending these Gents.
I have heard the DNM above but not the others.
Just sharing what I know via this thread.

Cheerio

 

[kaushik]

for a newbie or even an avid audio listner on a budget
i have found nothing better than the speaker we demoed at the mumbai meet from DNM

for 8-9 k odd i dont think ive ever heard a speaker better
i personally like it better than the entry level warfedales

Doing decent job and going to 38Hz! at 9k will be awesome .


Why no DNM thread here or DNM is only custom ordered ?

planning to gift a mini setup for parents .
tripath +DNM pair will be very good option in <15k

 

[mpw]

Doing decent job and going to 38Hz! at 9k will be awesome .


Why no DNM thread here or DNM is only custom ordered ?

planning to gift a mini setup for parents .
tripath +DNM pair will be very good option in <15k

====================================================

The DNM model is SCS808 not 810. Anyway the 808 is the one we heard at the Mumbai HFV meet and it was good.

Till last week the quoted MRP was 9k per pair.

rgds,
mpw

 

[magma]

yes the DNM speaker in question is the 808 i think
it was not on their website

DNM is not a very advertised product since they have their hands full in the commercial audio market

however their owner and founder whome i have now got to know well ( mr dilip bajaj ) has a good ear
DUe to this he was able to instruct his vendors to properly design this speaker

the speaker also has just a low mrp ( low profit ) only because it is not an international brand and mr dilip is not very enthusiastic on entering the home audio mkt currently

But INMO it pretty much takes out most international brands under 15k and anything in that range ( bass in the only thing it is shy off compared to the warfies )
but it makes up in its fluid midrange ( which in any case i am partial to )

you must remember 9k is bloody FREE considering just the cab on my XLS encore build has cost me 10k ( with a paint job though)

now in 9k how do you expect a person to give you a finished speaker including his profit!
im pretty sure he doesnt make over a 1000-1500 bucks on this which is piddly

 

[kaushik]

mailed mr dilip bajaj ,
i asked the price for curved speakers . He quoted 9k/pair.

I hope it is SCS808 as magma said.. again mailed for confirmation.

thanks magma for the info.

 

[sribuddy]

All,

Yes, I know this person, He is a friend of mine who is making the speakers (Custom Made). I had asked him on the dB sensitivity of these speakers. I heard them during my visit to his place... Sounded good atleast to me.. I could audition them only for 10-15 mins...

If I get a chance to listen for more, I will post my opinion.

 

[koushik]

Can anyone please post a photo or share link of DNM 808 please?

 

[denom]

These are the pics of the 808, as clicked during the Mumbai Meet Held Last year

 

[jaudere]

Have not heard 808 but DNM 'high end' speakers (thats the model name) are very good. Priced 15k. Its there on their website. They are very musical. I think this was one of the DNM offerings that people liked at HFV meet.

 

[captrajesh]

Could someone talk with them and some other speaker maker that I had read about by (Denom I think) in some other thread, to build cabinets for our Western Indian participants of group buy of GRR kits.

 

[spirovious]

These are the pics of the 808, as clicked during the Mumbai Meet Held Last year

Thanks Denom,I searched the meet thread but couldn't get the same picture.
That PC case looks familiar.

 

[gcpraveen]

That looks very good finish and comes in budget, does anywhere in blore or anyone in blore has these for demo? How to contact dnm?

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

 

[murali_n]

Hi all,

Another Indian manufacturer is :

Sanen

Has anyone heard this?

N.Murali

 

[kneo]

@kaushik - Please keep us posted on your proposed setup of Topping + DNM 808. I too am interested in this. What are you planning to use as the source?

 

[spirovious]

Hi all,

Another Indian manufacturer is :

Sanen

Has anyone heard this?

N.Murali

I heard them many times in past,in Mumbai expo & showroom.I can say that they were OK.This small DNM is real VFM.
Sanen also has HT speaker pack,not impressed by them.Their powered HT pack used to be bright.
Not heard if they have new series.