F5 Amplifier Kit Available (India Only)

suds

New Member
Joined
May 23, 2009
Messages
72
Points
0
Location
Bangalore, India
Hi,

I can now make available F5 Complete Kit with Components.. (Only within India)
Kit includes only Electronic components,

PCB Spec: Double Side, 2.4mm PTH (Plated Through Hole), HAL, PCB with Solder Mask, Legend.

Stereo Amplifier Kit Cost : Rs.1500 (Includes PCB, Components)

PSU Kit Cost : Rs.1750 (Includes PCB, Components, Capacitors, Rectifier, Thermistors.)


Does not Include : Hardwares i.e Transformer, Heat Sink, Cabinet, Wires

Same with Gold Plated PCB's : Rs.1500 Extra. (Including Amp and PSU)

Packing + Shipping (Courier) Rs.250 (Extra)

Lead time : 10 Days from Confirmed Order with Payment.

Mail : [email protected]

Note: Kits Available only with in India, No International Shipping.

Thanks
Suds


References :
First Watt F5 Power Amplifier

6 Moons F5 Review
 
Last edited:
damn,if only i had some diy skills i could order one of these!!any willing forum member who could build one for me if i got this :D??(on payment of course!!).cheers
 
soulf..
i am just a DIY sailor ....

rallynut ,
if u can ,
get the cabbie done ,
get the transformer from miracle , H. sinks from cochin,
i can offer a build for a fee.
 
Hi,

I can now make available F5 Complete Kit with Components.. (Only within India)
Kit includes only Electronic components,

PCB Spec: Double Side, 2.4mm PTH (Plated Through Hole), HAL, PCB with Solder Mask, Legend.

Stereo Amplifier Kit Cost : Rs.1500 (Includes PCB, Components)

PSU Kit Cost : Rs.1750 (Includes PCB, Components, Capacitors, Rectifier, Thermistors.)


Does not Include : Hardwares i.e Transformer, Heat Sink, Cabinet, Wires

Same with Gold Plated PCB's : Rs.1500 Extra. (Including Amp and PSU)

Packing + Shipping (Courier) Rs.250 (Extra)

Lead time : 10 Days from Confirmed Order with Payment.

Mail : [email protected]

Note: Kits Available only with in India, No International Shipping.

Thanks
Suds


References :
First Watt F5 Power Amplifier

6 Moons F5 Review

Sudhir,

I would be interested in a stereo pair including PSU. I will send a email to you separately.

Thanks.
Anil
 
Suds

Some thoughts:

It might be helpful if you can also include some links/estimated costs to the rest of the stuff. For example, if the transformers (if it is a troidal) is provided, I can email miracle and request them to consider a special quote, mentioning this forum, and try to get some benefit. Similarly if anyone has a reliable vendot for the chassis, please come forward. Making the whol;e shebang user friendly will sommthen the way. a friend(Philip from Lizzner Electronics who came to my place) can easily solder the kit for a very reasonable fee, if anyone wants it.

Any suggestions on heat sink?

Cheers

George
 
Hi there
Dont know much about DIY. Wanted to know if this amp can be used as a good headphone amp?
Also i would like to know which brand components are used and which ones can be used to improve the performance
 
thanks soulforged.and mighty nice of u to offer,kaushik.in the excitement of seein suds' thread,i didn realise the actuals,..and that has just put my fiendish plan on hold for now.it is a very highly regarded design,and has sound quality thats supposed to be quite amazing,but i suppose with the HUGE heatsinks and everything else required,will definitely suit the purposes and budget of someone staying in a 'colder' climate :D.am too green in my audiophile hobby to be askin for an F5,methinks :indifferent14:.thanks suds and cheers
 
thanks soulforged.and mighty nice of u to offer,kaushik.in the excitement of seein suds' thread,i didn realise the actuals,..and that has just put my fiendish plan on hold for now.it is a very highly regarded design,and has sound quality thats supposed to be quite amazing,but i suppose with the HUGE heatsinks and everything else required,will definitely suit the purposes and budget of someone staying in a 'colder' climate :D.am too green in my audiophile hobby to be askin for an F5,methinks :indifferent14:.thanks suds and cheers

If it was me, I'd just take a chance and try it out in my system and see how it is and then decide if it runs too hot for my room. Even if you decide to let go, I don't think you'll have any issues selling it at cost. :)
 
rally,

correct don't rush in.

the heat sinks , trafo ,cabbie etc will cost ample amount of money ,

guys doing audio business can give estimates.
i dont have time to roam shop to shop for these


that cold climate thing i am not sure .........

gruby,

bad idea .... 50% cost only u can recover if you are lucky!
this will go 10k+ when fully built..
 
Last edited:
@gruby..hmm.lets see if my impulsiveness gets the better of me :p.thanks nd cheers
@kaushik,the 'cold climate"bit-here's an amp that could effectively double up as a room warmer??!!heh.thanx again
 
Last edited:
...
gruby,

bad idea .... 50% cost only u can recover if you are lucky!
this will go 10k+ when fully built..

Hmm, I see. Well I guess then it's just me who wouldn't mind buying at cost, a completely built F5 clone, especially since the cost would not be more than 20K. :)
 
I can now make available F5 Complete Kit with Components. Kit includes only Electronic components,

PCB Spec: Double Side, 2.4mm PTH (Plated Through Hole), HAL, PCB with Solder Mask, Legend.

Stereo Amplifier Kit Cost : Rs.1500 (Includes PCB, Components)

PSU Kit Cost : Rs.1750 (Includes PCB, Components, Capacitors, Rectifier, Thermistors.)


Does not Include : Hardwares i.e Transformer, Heat Sink, Cabinet, Wires

Same with Gold Plated PCB's : Rs.1500 Extra. (Including Amp and PSU)

if u can, get the cabbie done, get the transformer from miracle, H. sinks from cochin

Could you please list the components in the kit here?

It might be helpful if you can also include some links/estimated costs to the rest of the stuff.

Thats a great beginning. But now the confusion started. Can someone knowledgeable list out the components? See the table.
 
Last edited:
Hi there
Dont know much about DIY. Wanted to know if this amp can be used as a good headphone amp?
Also i would like to know which brand components are used and which ones can be used to improve the performance

"It will be too much for Head Phone Amp.."
 
Count me in for the kit

Finally all parts has been procured. (Sorry for delay)

FET 2SK170 , 2Sj74 Pair from Toshiba arrived at Mumbai, will go for customs inspection, then will get it cleared after paying duty

FET 2SK170 , 2Sj74 from Toshiba.
ZTX450, ZTX550 from Zetex

Resistors: KOA Speer Electronics, Inc USA-
MIL-R-22684 : 0.5watts 1%, Metal Film Resistors , 3Watts 5% Metal Oxide Resistors. with (300volts operating voltage.)
Capacitors, 20,000 uf 50V, 105 degree C
MIL-R-22684 is same spec as RN55 of Vishay.


Once I get FET cleared from customs, will courier the pending order..
and who are waiting for parts to come.. may order now, so I can get PCB Manufactured.

mail me for details, pics, [email protected]

Thanks
suds
 
Last edited:
Get the Award Winning Diamond 12.3 Floorstanding Speakers on Special Offer
Back
Top