rockingx
Member
Hi Friends,
I own almost 2 years old Norge 1000. lately I found that sound of one of the speaker was more than that of other one.
I replaced the volume pot with new one. I had to replace B100K with B50K pot as I could not find B100K at that time. It started working almost 90% better.
Now I got few B100K from one of my friends (brand ELCON, found in Lajpat rai market). Today I replaced the pot with the new B100K but lost the sound of the amplifier.
After replacing the pot, there was no sound at all. I heard the click on powering up/down in speakers but nothing other than that sound. No sound in RCA cable, nothing at all.
I thought there could be some problem with the new pot, so I replaced it with another one but the problem remain same. I then changed it back with the old one (B50K, which was working earlier) but the problem still persist.
I found some sound while touching the soldering points of the volume pot (on the preamp PCB where the pots are soldered), but no sound from any source.
I don't know if preamp PCB got damaged while soldering the pot or if there is any other problem.
Can anyone please suggest what should I do or try now? I don't have much knowledge of electronics but can do little bit of soldering.
If anyone can suggest where I can get it checked and repaired in Delhi
(preferably in North/East Delhi..that will be great help.
I am looking for support from all of you.
Thanks a ton in advance.
I own almost 2 years old Norge 1000. lately I found that sound of one of the speaker was more than that of other one.
I replaced the volume pot with new one. I had to replace B100K with B50K pot as I could not find B100K at that time. It started working almost 90% better.
Now I got few B100K from one of my friends (brand ELCON, found in Lajpat rai market). Today I replaced the pot with the new B100K but lost the sound of the amplifier.
After replacing the pot, there was no sound at all. I heard the click on powering up/down in speakers but nothing other than that sound. No sound in RCA cable, nothing at all.
I thought there could be some problem with the new pot, so I replaced it with another one but the problem remain same. I then changed it back with the old one (B50K, which was working earlier) but the problem still persist.
I found some sound while touching the soldering points of the volume pot (on the preamp PCB where the pots are soldered), but no sound from any source.
I don't know if preamp PCB got damaged while soldering the pot or if there is any other problem.
Can anyone please suggest what should I do or try now? I don't have much knowledge of electronics but can do little bit of soldering.
If anyone can suggest where I can get it checked and repaired in Delhi
(preferably in North/East Delhi..that will be great help.
I am looking for support from all of you.
Thanks a ton in advance.