Installing Plasma TV on the wall - anybody

dashdash

New Member
Joined
Jul 24, 2011
Messages
15
Points
0
Location
Bangalore
Hi,

I am shifting my residence this weekend will need to move my plasma to a new house. Wondering how to get the TV back on to a wall. Last, when I bought it Panny guys did the job.

I wanted to know who can do this job bit professionally. One who knows the type of screws needed to hold the weight of plasma etc.

And lastly, I am in Bangalore, looking for local help.

Please help!
Raghu
 
Last edited:
Just ask the same guys.. they'll charge you some money but they'll do it.. or you can ask some local technician..
 
Just ask the same guys.. they'll charge you some money but they'll do it.. or you can ask some local technician..

Last time the installation was on a plain wall. Panny guys could hardly do a good job on that. This time I have a wall cladding and dont have courage to call Panny guys. I know putting a screw doent need lot of skill but believe me the Panny guys screwed it big time and really tested my patience.
 
then call some local technician.. if you have friends who have wall mounted TVs then u can ask them for the guys who installed their TV.. doesnt matter technician is from Samsung or Panny.. you give them money n they'll do the job.. I found samsung guys very professional.. they mounted my TV within 5 mins without any hassles..
 
then call some local technician.. if you have friends who have wall mounted TVs then u can ask them for the guys who installed their TV.. doesnt matter technician is from Samsung or Panny.. you give them money n they'll do the job.. I found samsung guys very professional.. they mounted my TV within 5 mins without any hassles..

Yeph! that is the ask. Looking for any contacts who can do a good job. Please pass on phone# if you know.

I am not sure if I can call samsung call center and ask for an engg :) !
 
Is it safe to mount tv on wall cladding?

That is where I am looking for a person with experience. The setup I have is "Wall + 10mm ply + space for wiring + 10 mm ply". So the screws need to be going through the cladding part (plywoods) and into the wall.

Has anybody tried similar setups?
 
Buy from India's official online dealer!
Back
Top