Amphenol are RCAs? If yes, I hate thembecause their rubber bellows just disintegrate and fall off.
Banana plug and RCA both terminated to mogami cables
Regarding Banana Plugs
- Thread starter forever.pramod
- Start date
Banana plug and RCA both terminated to mogami cables
Yes thats correct. Need unscrew the bottom part, take the cable through it and then spread out the core wires around the top rim above the threads. Then screw it back to the top part. The wire is held tight with a nice firm contact.
Although it was a royal pain to spread out the core in my case. Each core wire is a thick metal copper wire. I can do just about 3 or 4 strands of the core, not more.
Okay, I just saw the Amazon link. The last picture in the product page gives instructions on how to fit it. This is exactly how the shielding of some types of BNC connectors are made. It's definitely more fiddly than simple screw but I'm guessing it will provide a much more secure connection since the two barrels will press it together. Very nice connector
I would say this is a lot more robust than the screw type. Here once the two parts are screwed there is no way the cable can come out or slip away from the plug. On the other hand, I have seen the screw unable to hold the wire in the same manner.
MaSh
Dr.Lakshay
Active Member
How's the comparative quality of both?
the sewell direct ones are screw type so they have more secure connection. Thats what i wanted but in audio clarity i don't see any difference.
Planning to sell these amazon basic banana plugs since i got the sewell ones now. here is the link -
https://www.amazon.in/AmazonBasics-...8&qid=1523957234&sr=8-2&keywords=banana+plugs
Cheers.
https://www.amazon.in/AmazonBasics-...8&qid=1523957234&sr=8-2&keywords=banana+plugs
Cheers.
antoniodias
Active Member
Please Dr Lakshay. Please do share your experience with us. God zBless
I am using chord Odyssey 2 cable which is silver plated over copper, reading the discussion of brass here i am thinking if Furez 40AG banana having similar material would be better suited for me. Any suggestions
adhingra
Member
I recently got Mediabridge bananas from US. Pack if 6. Very high quality and totally satisfied.
antoniodias
Active Member
I am using Nakamichi metal Banana plugs. I must say they are perfect fir the past 1 year of usage without any flaw
How are the Chrome plated copper banana plugs? Will audio quality be improved? or are the gold plated plugs better? It's said that chrome plated will be good for better signal transfer.
https://www.ebay.co.uk/itm/8-x-EDGE...=item25ed4ef346:g:NXEAAOSwkNpaV39R:rk:14:pf:0
https://www.ebay.co.uk/itm/8-x-EDGE...=item25ed4ef346:g:NXEAAOSwkNpaV39R:rk:14:pf:0
Please check specs to see the conductivity % of the banana. Furez 40ag is advertising having 105% conductivity
Right you are, here it is
https://en.m.wikipedia.org/wiki/International_Annealed_Copper_Standard
Quoted from above
The average resistanceof the samples was determined to be 0.15292 Ω for copper wires with a mass of 1 gram of uniform cross section and 1 meter in length at 20 °C. In the United States this is usually written as "0.15292 ohm (meter, gram) at 20 °C".
Look at the below quote from https://www.douglasconnection.com/F...r-Banana-Plug-Connectors-Pair-FZTSTSB40Ag.htm
The TST-SB40 series banana speaker cable plug connectors are offered without plating (app. 93% IACS), with direct gold plating (app. 76% IACS) or with direct silver plating (app. 105% IACS) to suit a variety of installation requirements. Nickel (app. 24%IACS), Rhodium (app. 39% IACS) and Platinum (16% IACS) are not used in our plating schemes because these low conductivity metals only take away from the electrical performance of the connector while adding cost. Hard metals like rhodium really are only advantageous in connectors that require extreme resistance to abrasion from extensive repeated rubbing which is not typically associated with AV connections. IACS (International Annealed Copper Standard) is the standard by which conductivity of copper alloys and metals are compared.
Now the above explains physics but not sonic benefits which is what I am unsure. But reading previous posts above its seems majority basic plugs are brass made
Follow HiFiMART on Instagram for offers, deals and FREE giveaways!
