Showcase your audio/video setup here!......

[jenson]

Pretty creative diffractors on front wall

 

[RRR]

My audio set-up:

Turntable: Kuzma Stabi S
Tonearm: Kuzma 4 Point 9
Cartridge: Phasemation PP-2000
CD Player: Accustic Arts Player ES
CD Transport: Accustic Arts Drive 2
Dac: Accustic Arts Tube Dac 2
Streamer: Arcam rplay

Preamp: Doshi Audio EVO Series
Power Amp: Accustic Arts Amp 2 Mk 3
Phono preamp: RCM Audio Sensor 2
Speakers: Gauder Akustik Vescova Mk 2

Cables: HiDiamond Big AES/ EBU: HiDiamond XLR 3; Organic Audio Reference RCA; Zu Audio Varial XLR

Isolation: Hi Fi Stay Gyrotension - M
Timbernation Maplewood
Townshend Audio Isolation Platform
Sound Foundation Rollerblocks

Power Distribution: Sound Foundation; Environmental Potential EP 2050

Congrats on acquiring the Gauder Acoustics.
Have been reading great reviews after you mentioned them. Would love to listen to them someday.

 

[oracle1974]

deleted

 

[oracle1974]

Congrats on acquiring the Gauder Acoustics.
Have been reading great reviews after you mentioned them. Would love to listen to them someday.

Thanks and sure do come to listen to the system.

 

[Yelamanchili manohar]

My audio set-up:

Turntable: Kuzma Stabi S
Tonearm: Kuzma 4 Point 9
Cartridge: Phasemation PP-2000
CD Player: Accustic Arts Player ES
CD Transport: Accustic Arts Drive 2
Dac: Accustic Arts Tube Dac 2
Streamer: Arcam rplay

Preamp: Doshi Audio EVO Series
Power Amp: Accustic Arts Amp 2 Mk 3
Phono preamp: RCM Audio Sensor 2
Speakers: Gauder Akustik Vescova Mk 2

Cables: HiDiamond Big AES/ EBU: HiDiamond XLR 3; Organic Audio Reference RCA; Zu Audio Varial XLR

Isolation: Hi Fi Stay Gyrotension - M
Timbernation Maplewood
Townshend Audio Isolation Platform
Sound Foundation Rollerblocks

Power Distribution: Sound Foundation; Environmental Potential EP 2050

One stunning setup...enjoy

 

[SwaroopKS]

My audio set-up:

Turntable: Kuzma Stabi S
Tonearm: Kuzma 4 Point 9
Cartridge: Phasemation PP-2000
CD Player: Accustic Arts Player ES
CD Transport: Accustic Arts Drive 2
Dac: Accustic Arts Tube Dac 2
Streamer: Arcam rplay

Preamp: Doshi Audio EVO Series
Power Amp: Accustic Arts Amp 2 Mk 3
Phono preamp: RCM Audio Sensor 2
Speakers: Gauder Akustik Vescova Mk 2

Cables: HiDiamond Big AES/ EBU: HiDiamond XLR 3; Organic Audio Reference RCA; Zu Audio Varial XLR

Isolation: Hi Fi Stay Gyrotension - M
Timbernation Maplewood
Townshend Audio Isolation Platform
Sound Foundation Rollerblocks

Power Distribution: Sound Foundation; Environmental Potential EP 2050

Nice set-up! Did those plinths under speaker come along with them or are they custom made?

 

[oracle1974]

Nice set-up! Did those plinths under speaker come along with them or are they custom made?

They came separate . They are the Townshend Audio Seismic Isolation Podium.

 

[oracle1974]

One stunning setup...enjoy

Thanks .

Pretty creative diffractors on front wall

They are very thick curtains and help a lot.

 

[sunilj]

Aikido (Octal) - fired this up last year on a bare board. Finally got the chassis delivered in July. Up last Sunday.

The chassis is by Beginner_N (Nishant) - a gigantic thanks for putting up with me

Sounds just the same, ridiculous. Its been running a 300b (Tubelab) till now whose sound I really like.

I fired up a Tubelab 2A3 today and its got new company

 

[Beginner_N]

Aikido (Octal) - fired this up last year on a bare board. Finally got the chassis delivered in July. Up last Sunday.

The chassis is by Beginner_N (Nishant) - a gigantic thanks for putting up with me

Sounds just the same, ridiculous. Its been running a 300b (Tubelab) till now whose sound I really like.

I fired up a Tubelab 2A3 today and its got new company

Great to see this assembled. Thanks for giving opportunity to work on it. And as always thanks for your patience with me.

 

[Mahi]

Great to see this assembled. Thanks for giving opportunity to work on it. And as always thanks for your patience with me.

Very nice build sir

 

[sunilj]

Thank you for all the 'likes'. The build is quite simple actually - choose the gain, choose the tube and off you go.

The end result is well worth it.

 

[ktks1]

Sold my old faithful Polks and bought these:

1. Indiq Diamond Mishra and Platinum Centre (yet to place the centre speaker)
2. Leaf Audio DAC (based on ES9038Q2M chip)
3. Aiyima A07 Class D amplifier (based on TPA3255)

Yet to get the custom cabinet made to accommodate LCR. Using ghetto stands for LR now.

Playing music on Spotify via BT makes me wonder how well technology has advanced to provide such good value proposition.

 

[hdmaniac]

Just completed black velvet. I must say the image and the immersion is fantastic now. It's very hard to switch off the Projector once you have turned it on. Black Velvet has been one of the best additions to my HT so far. Completely sucks away any stray light and the result is a complete black hole. [ The speakers are partially done in velvet, will cover them all up in the weekend time, probably going to change the center channel to something beefier ]
The room is half done in Velvet, side walls, ceiling and the floor too. This pic is with all lights on.
Next addition to my HT is again on the video side, a high end HTPC to max out MadVR. Looking to buy a GPU soon ( preferably the RTX 3090 or the 3080Ti at the least ) View attachment 59540

Looking great. Could you share some insight on how the velvet is attached to the walls and ceiling? I may give it a shot if it’s diy

cheers!

 

[amitk777]

Aikido (Octal) - fired this up last year on a bare board. Finally got the chassis delivered in July. Up last Sunday.

Hi Sunilj,

Which DAC do you use please ? Is it also DIY ?

 

[Tuhin Lavania]

Looking great. Could you share some insight on how the velvet is attached to the walls and ceiling? I may give it a shot if it’s diy

cheers!

I used Styrene Emulsion ( similar to Fevicol, which is a brand name ) for bonding of Velvet with wall.
Make sure that you really want to use this bonding emulsion to attach velvet to the walls and ceiling coz if you want to remove the fabric off the walls later on, the paint on the walls will get damaged to a extent where you will have to paint the wall again. I have a dedicated room so i could use that as i dont plan to remove the velvet at any point in future.

 

[sunilj]

Hi Sunilj,

Which DAC do you use please ? Is it also DIY ?

Hi amitk777, using the Topping E30. Have the D10 as well. I find them to be good value for money.

 

[IndianEars]

My audio set-up:

Turntable: Kuzma Stabi S
Tonearm: Kuzma 4 Point 9
Cartridge: Phasemation PP-2000
CD Player: Accustic Arts Player ES
CD Transport: Accustic Arts Drive 2
Dac: Accustic Arts Tube Dac 2
Streamer: Arcam rplay

Preamp: Doshi Audio EVO Series
Power Amp: Accustic Arts Amp 2 Mk 3
Phono preamp: RCM Audio Sensor 2
Speakers: Gauder Akustik Vescova Mk 2

Cables: HiDiamond Big AES/ EBU: HiDiamond XLR 3; Organic Audio Reference RCA; Zu Audio Varial XLR

Isolation: Hi Fi Stay Gyrotension - M
Timbernation Maplewood
Townshend Audio Isolation Platform
Sound Foundation Rollerblocks

Power Distribution: Sound Foundation; Environmental Potential EP 2050

LOVELY, Well thought of & implemented set up.

CONGRATS!

 

[raghupb]

Sold my old faithful Polks and bought these:

1. Indiq Diamond Mishra and Platinum Centre (yet to place the centre speaker)
2. Leaf Audio DAC (based on ES9038Q2M chip)
3. Aiyima A07 Class D amplifier (based on TPA3255)

Yet to get the custom cabinet made to accommodate LCR. Using ghetto stands for LR now.

Playing music on Spotify via BT makes me wonder how well technology has advanced to provide such good value proposition.

View attachment 61245

View attachment 61246

View attachment 61247

View attachment 61248

Nice!!.
Stands planned for the new speakers?

Cheers,
Raghu

 

[ktks1]

Nice!!.
Stands planned for the new speakers?

Cheers,
Raghu

A cabinet which can accommodate LCR and rest of the electronics is getting ready.
I know of a person who has CNCs and laser cutters and does a good job with customization.

Here's the drawing: