M
mpw
Guest
Nice work Sadik..
DIY 10 Inch Subwoofer
- Thread starter sadik
- Start date
chandu2106
Active Member
Awesome looks....well done Sadik.
prateekatasniya
Well-Known Member
Was waiting for this..Finally Its Completed.
Sadik
As expected.. Looks awesome
surfatwork
Well-Known Member
Thats a whole lot of hex bolts!
Great job though.
Great job though.
revolty
Active Member
Sadik ji,
Good work. Was waiting for the final pics. Please do post demo video.
Good work. Was waiting for the final pics. Please do post demo video.
Nice project sadik... do love the finish.
What was your design goal in selecting this particular sub woofer driver... did the manufacturer provided t/s parameters or have you measured the same.
Also, which software did you use for modelling? might help future builders.
Can the amp (heat sink) be vertical instead of horizontal?
something like this...
What was your design goal in selecting this particular sub woofer driver... did the manufacturer provided t/s parameters or have you measured the same.
Also, which software did you use for modelling? might help future builders.
Can the amp (heat sink) be vertical instead of horizontal?
something like this...
The goal was to make an Powerful Active Sub Woofer within my permissible budget, There were two plus points one is ts parameters and second was the price of the driver.
One of my friend has designed the enclosure for me, There were some space constrains to fit the heat sink vertically, also the Amp being class D, it will not get very hot hence the horizontal fitting in my case will not be an issue.
Can you post this plate amp photo from the other side? I need to see the layout.
Sadik
I am uploading Test Video of Sub
Iwai 10 Inch Sub Testing
Its recorded from Cell phone so very sorry for the sound as well as video quality.
I personally don't believe to judge the sound of speakers played on another speakers from youtube. But i am uploading this video because some of my friends have asked me to do. I hope you will have some idea of the Subwoofer.
There is one thing i just realized there is a little hum noise coming from sub-woofer, its so faded that you have to be at least 12 inches near to the speaker to listen it.
Iwai 10 Inch Sub Testing
Its recorded from Cell phone so very sorry for the sound as well as video quality.
I personally don't believe to judge the sound of speakers played on another speakers from youtube. But i am uploading this video because some of my friends have asked me to do. I hope you will have some idea of the Subwoofer.
There is one thing i just realized there is a little hum noise coming from sub-woofer, its so faded that you have to be at least 12 inches near to the speaker to listen it.
That Surely sounds good. Must be really good in person. Please PM me the specs and costs involved? Looking for a single/dual Sub setup.
MaSh
saheb11123
Active Member
Instead of plate amp i will be making a separate mono-block for this sub. Below are the photos of driver. Its 10 inch driver FS is around 26Hz. "Iwai" make.
Sadik
What are these drivers? How much do they cost?
Sanjeev Kumar
New Member
REW room acoustics and audio device measurement and analysis software
REW is free software for room acoustic measurement, loudspeaker measurement and audio device measurement and analysis
www.roomeqwizard.com
Thank You Bro
I hope above will be helpfulREW room acoustics and audio device measurement and analysis software
REW is free software for room acoustic measurement, loudspeaker measurement and audio device measurement and analysis
Till date i have only invested in Power Tools. Now next investment is a nice measuring gear.
Order your Rega Turntables & Amplifiers from HiFiMART.com - India's reputed online dealer.
