DIY FAST Ref Monitor designed by XRK Audio [ Only Enclosure ]

[sadik]

Getting ready for Paint Job...

1st Coat Sanding Sealer. It is used to seal the Pores of MDF. (This will be sanded with 400 grit paper after drying)

Sadik

 

[Naveenbnc]

Super...
What is that work shop Sadik ???
Its awesome to have a place like that

 

[sadik]

Super...
What is that work shop Sadik ???
Its awesome to have a place like that

Yes that's my Work Shop @Naveenbnc It's a Fabrication Shop.

Below is today's update. After sanding the sealer with 400 grit paper. Primer is applied.

Sadik

 

[sadik]

Update.
1st coat of PU Paint.

Below is photo after sanding the first coat with 600 grit sand paper. (In photo you will not notice the difference, but the difference is there)

Sadik

 

[Naveenbnc]

with black drivers this shade gives a nice contrast !!!

 

[keith_correa]

Just needs a vertical black racing stripe across the front baffle offset from the middle.

 

[raghupb]

Just needs a vertical black racing stripe across the front baffle offset from the middle.

Ala Ferarri or Lamborghini!!

 

[sadik]

The Final Coat....

Sadik

 

[MaSh]

Wow they are absolutely gorgeous. Is this going to be the final shade?

MaSh

 

[sadik]

Wow they are absolutely gorgeous. Is this going to be the final shade?

MaSh

Yes. It's final shade.

 

[MaSh]

Yes. It's final shade.

Wow lovely. Really beautiful. Which drivers will be fitted in it?

MaSh

 

[sadik]

Wow lovely. Really beautiful. Which drivers will be fitted in it?

MaSh

Below is the link.
Dayton Audio RS225-8 8" Reference Woofer for Woofer.
Dayton Audio PS95-8 3-1/2" Point Source Full Range Driver 8 Ohm for Full-range.

Both will be fitted by the Buyer at his end. [I am just making the Enclosure part]

Sadik

 

[sadik]

Another Built on the way with same concept, but with slight changes, In this built woofer enclosure is ported.

Getting Ready for make up (aesthetics)

Sadik

 

[sadik]

Update on the above Built. The Final Paint [Mirror Finish]

"Bahut Papad Bele Hai Sahab" to get this Finish.......

Sadik

 

[tuff]

Awesome looking. Perhaps better than the previous red one you built. Good accomplishment

 

[sadik]

Awesome looking. Perhaps better than the previous red one you built. Good accomplishment

Yes. You are Righ. The finish is smooth than the Red ones.

 

[sadik]

And they are finished now.

The drivers, and speaker terminals will be fitted by the user. And for the finish of Enclosure, I am really very happy with the results.

Sadik.

 

[all4music]

absolutely stunning!!