anujmishra
Active Member
Thanks a lot. Is that sanding machine similar to grinding machine? I am planning to buy one grinding machine this weekend. Or it can be used as sanding machine with proper grit grinding/sanding circle.
Group DIY Sub Build: With Peerless Driver and Forte 200 Watts Amp
- Thread starter anujmishra
- Start date
Thanks a lot. Is that sanding machine similar to grinding machine? I am planning to buy one grinding machine this weekend. Or it can be used as sanding machine with proper grit grinding/sanding circle.
soviet_selva
Member
What was the total cost of Peerless 12" drive and plate amplifier (including postage / courier up to Bangalore) ? if you can show the individual total cost it will be great.
Angular grinders cannot be used for finishing work and they are usually used for removing excess material. May be with a suitable wheel they can be used for buffing as well. While purchasing, look for models with removable wheel guard.
Try to get a quarter-sheet sanding machine that can use regular sand paper - B&D models similar to this cost around 3K - Black & Decker Tools | 1/4 Sheet Sander QS900
BTW angular grinders are easily available for rent as well.
anujmishra
Active Member
Price I already mentioned in opening post and courier charges depends upon how you want to receive it. You can get quote from Varsha Electronics. Same thing available at ebay.in but little pricey (10,300) with shipping to your doorstep.
No model # specified. Only T/S parameters.
anujmishra
Active Member
No progress so far this weekend at all as been busy with some other work. Carpenter is not here as he went out of state.
Finding a place where they can round all the edges of box. Still, a long way to go.
Finding a place where they can round all the edges of box. Still, a long way to go.
Hi guys
i built a sub using the above components a couple of months ago.
built a sealed sub as i wasnt able to avail a good port. as far as results of the projetc go, i am pretty happy. have paired it with the wharfedale obsidian 5.0 set.
crossover freq set to 120 to so i use the woofers in the towers to a minimum.
great for movies.
one problem i faced with the amp is tht if i leave the sub hooked to a power supply all day, it tends to heat up. so i have to switch it on/off everytime i use it.
i would also suggest hooking the raw driver to winisd and burning it in for a couple of days
i have lined the interiors with rubberised 3m mat(the kind u see these days on doorsteps) and with high density foam with different levels. also added fibre glass for additional bump.
i built a sub using the above components a couple of months ago.
built a sealed sub as i wasnt able to avail a good port. as far as results of the projetc go, i am pretty happy. have paired it with the wharfedale obsidian 5.0 set.
crossover freq set to 120 to so i use the woofers in the towers to a minimum.
great for movies.
one problem i faced with the amp is tht if i leave the sub hooked to a power supply all day, it tends to heat up. so i have to switch it on/off everytime i use it.
i would also suggest hooking the raw driver to winisd and burning it in for a couple of days
i have lined the interiors with rubberised 3m mat(the kind u see these days on doorsteps) and with high density foam with different levels. also added fibre glass for additional bump.
anujmishra
Active Member
That is good news. I will contact Varsha for ports. I made one port but I'm not happy with quality. Good port gives professional look to the sub.
anm
Well-Known Member
great. So now I can convert my sealed boxes to ported easily. Pls share some more info on flared ports, diameters available etc. Can the ports be folded to have effective length that is larger than the box dimensions? If yes, are they available pre-folded?
cmsajith
Well-Known Member
If you feel difficult to use the flame, dip one end of the pipe in boiling water and once you get enough flexibility use the bottle to flare the pipe.
anujmishra
Active Member
I just spoke to Varsha and he informed that one of his client actually have stock of ports. He shared his mobile number and asked me to give his reference.
anujmishra
Active Member
After some period of inactivity, I am able to fire my subwoofer yesterday. I catch hold another carpenter and did required changes in sub box.
All edges made round. Need to make it perfect by sanding while painting. Box is not yet damped and I hooked Plate Amp and Driver into it and it is working. Next few days will be test period before finalizing.
Pain point in port designing. Three times I failed to make it perfect. Now need some experts help to design flare in port. Please.
Today, I will put video and pictures of it in this thread.
Here are some pictures of initial setup:
All edges made round. Need to make it perfect by sanding while painting. Box is not yet damped and I hooked Plate Amp and Driver into it and it is working. Next few days will be test period before finalizing.
Pain point in port designing. Three times I failed to make it perfect. Now need some experts help to design flare in port. Please.
Today, I will put video and pictures of it in this thread.
Here are some pictures of initial setup:
Last edited:
hi
I am not an expert but the price u mentioned for peerless is 2800rs. In Sp rd u get original jbl 12 " sub box seal pack for 2400 rs. Now the point is our experts in the forum may be able to tell wether Peerless is Better than JBL??
anm
Well-Known Member
do you remember the model number etc so that we can find out some params about the driver/ cabinet.
anujmishra
Active Member
Whether that JBL is for Car use or HT use?
I think it should be for car usage, I got similar kind of a quote for my car JBL sub fitted with the box and amplifier total around 7k.
Thanks
Purchase the Audiolab 6000A Integrated Amplifier at a special offer price.
