Help: Garrard AT-6 RCA Interconnects

[Record Player]

I need some assistance on where I can rightly connect the RCA interconnects on the Garrard AT-6.

I've gotten confused and I do not want to mess anything up.

Below are the pictures of the Stereo Wiring Diagram and where the tonearm wires are soldered.

 

[G401fan]

White and red wires are 'live' connections, blue and green wires are for ground.
Remove your headshell when you're doing the soldering, as you don't want the heat -travelling up those fine wires - to damage the cartridge.

 

[jls001]

Follow the colour code mentioned here: http://www.hifivision.com/diy/43653-ht-mc-phono-stage-ad797-13.html#post506857

 

[reubensm]

G401fan is spot on, I've drawn a little something up to help illustrate his directions

Important: Don't forget to remove the headshell with cartridge before soldering as also instructed by G401fan. If you don't, your cart may get damaged. Also ensure that you don't dry solder and also, don't let solder blobs fall into the mechanical areas.

 

[Record Player]

G401fan is spot on, I've drawn a little something up to help illustrate his directions


Important: Don't forget to remove the headshell with cartridge before soldering as also instructed by G401fan. If you don't, your cart may get damaged. Also ensure that you don't dry solder and also, don't let solder blobs fall into the mechanical areas.

Thanks Reuben for these detailed illustrations. This really helps.

Cheers...