However on the surround speakers it was written as 4 ohms.
Are you sure it was written 4 ohm on the surround speakers ?
Hi Vaibhav,
I just checked specs of your system (MHC-V818) at given link below & it has different specs ! (May be because it's a Sony UK web page)
https://www.sony.co.uk/support/en/product/MHC-V818
If we consider the UK version specs, then you need to focus on the specs that i highlighted in red in the attached pics. Which says 130 + 130 = 260 Watt RMS @ 8 Ohm for both front channels. So you'll need an amp that gives you 270 to 300 Watt RMS power (not PMPO) & has impedance of 8 Ohm. Also make sure that it has 2 stereo channel outputs (one for front left & other for front right). If you also want to use both rear surround speakers, then you need to tell us rear/surround speakers' wattage in RMS as that detail is not available in that UK manual.
Attachments
Last edited: