The Giveaway Thread

Great gesture, Simon :clapping::clapping:
These were all my first round of my segregated second copies ; De cluttering!!I

I thought I would share it with audiophiles, than trading..

They are second best, not so in mint condition and covers not it good shape. Playable , and not for the one who owns high end turn table or cart.

My first preference goes with a vinyl collector who wants to fill the gap, and next is the one who is in search of it for nostalgia ..

Pls don't ask me about my bank details to remit courier charges; for this fraternity I would bear all the courier bill, except that you got to bear with my poor packing skills..

And by this month end , look out for some more listing here.
 
Ajesh KumarTS - Carpenters & BeeGees
Jmasceen - Christmas gifts from France
Soulforged - Paul Anka (Painter , ANKA) & Duran Duran

Above titles are reserved.Pls PM the address .
 
Last edited:
Hi Stevie Boy, for sure I would block both the Acker Bilk vinyls for you. Carpenters already blocked for another FM

Call-Me-Mister, is my all time favorite. Pls PM address.
 
Great collection, only if I had a TT .
Too bad been very afraid to even go down this path. Maybe someday someone will giveway a TT then i will have a try.

Great work keep up the good faith @simon
 
Esteemed Forum Members

I don't know if these are good enough, but should anyone desire I will be glad to offer a pair of DIY BLH Enclosure suitable for a driver like the FOSTEX 103EN full ranger

I had built it several years ago to try out a pair of BOLTON FR that was laying with me. I wasn't too happy with the final outcome chiefly due to the mediocre quality of the BOLTON driver which rolled off sharply at 10,000 cycles. But I am sure a good driver like the FOSTEX 103 will be much better.

They are primer finished as I was planning to spray paint them. Just one round of primer/sanding was done thus it will require some work. One can also do a veneer finish.

The enclosures are reasonable well made with high quality marine grade ply. I did not use a single nail/screw was used and everything is held together with fevicol.

These are available at Jamshedpur. I can possible pack and ship outstation at my cost but due to a very acute personal situation may not be able to do so till the end of this year.

Please note the BOLTON driver is not included as it is now installed in my vehicle. Just the boxes are on offer.

Some pics

UNDER GOING TRIALS
Picture%20033_zpsunhvbyav.jpg


INNARDS
semi_finished_zpsusg1k7jd.jpg


PROFILE
2nd_cost_primer_zpsetol0mlq.jpg


2nd_cost_primer2_zpspwcivxxi.jpg
 
wow!

I would have sprung at the offer but looking at the JH05 cars in the background, I am guessing these are in Jamshedpur...too far for me I reckon :(
 
aks, why did you not get the Fostex drivers? You may be familiar with this thread. The forum member is not active at all but very helpful. Yes, he has used Fostex.
Speakers - Serenata Audio High Sensitivity Speakers
http://www.hifivision.com/speakers/23947-checking-cost-fostex-speakers-india.html

Esteemed Forum Members

I don't know if these are good enough, but should anyone desire I will be glad to offer a pair of DIY BLH Enclosure suitable for a driver like the FOSTEX 103EN full ranger

I had built it several years ago to try out a pair of BOLTON FR that was laying with me. I wasn't too happy with the final outcome chiefly due to the mediocre quality of the BOLTON driver which rolled off sharply at 10,000 cycles. But I am sure a good driver like the FOSTEX 103 will be much better.

They are primer finished as I was planning to spray paint them. Just one round of primer/sanding was done thus it will require some work. One can also do a veneer finish.

The enclosures are reasonable well made with high quality marine grade ply. I did not use a single nail/screw was used and everything is held together with fevicol.

These are available at Jamshedpur. I can possible pack and ship outstation at my cost but due to a very acute personal situation may not be able to do so till the end of this year.

Please note the BOLTON driver is not included as it is now installed in my vehicle. Just the boxes are on offer.
 
aks, why did you not get the Fostex drivers? You may be familiar with this thread. The forum member is not active at all but very helpful. Yes, he has used Fostex.
Speakers - Serenata Audio High Sensitivity Speakers
http://www.hifivision.com/speakers/23947-checking-cost-fostex-speakers-india.html

Dear Naturelover,
Your mentioned second link relates to me.
I do not know whether he still brought those drivers and for those similar values or not.

Those cabinets are enticing.
 
Yes, Sumanta. Just to give him some pointers. He seems rather dejected. Got your thread just on a search.
Dear Naturelover,
Your mentioned second link relates to me.
I do not know whether he still brought those drivers and for those similar values or not.

Those cabinets are enticing.
 
Hi Stevie Boy, for sure I would block both the Acker Bilk vinyls for you. Carpenters already blocked for another FM

Call-Me-Mister, is my all time favorite. Pls PM address.

Hi Simon,

Could I come and meet you listen to your system? Would be nice to make a new audio acquaintance. However am shifting house so will be free on weekends only after end of May. Would this be ok? PM me where you're located. I'm in Whitefield.

Thanks so much!

Regards
Steve
 
Couriered soul forged and Stevie's lot..

Ajesh bear with me for a day, I couldn't find today the packing material. But for sure tomorrow..
 
Last edited:
Hello All,

I have the following Sony Ericsson(SE) mobile accessories available for local pickup only- Bangalore

- Original SE K750i & 800i ear phone (3units)
- SE USB cable (proprietary connector)
- Charger
- software CD
 
Esteemed Forum Members

I don't know if these are good enough, but should anyone desire I will be glad to offer a pair of DIY BLH Enclosure suitable for a driver like the FOSTEX 103EN full ranger

I had built it several years ago to try out a pair of BOLTON FR that was laying with me. I wasn't too happy with the final outcome chiefly due to the mediocre quality of the BOLTON driver which rolled off sharply at 10,000 cycles. But I am sure a good driver like the FOSTEX 103 will be much better.

They are primer finished as I was planning to spray paint them. Just one round of primer/sanding was done thus it will require some work. One can also do a veneer finish.

The enclosures are reasonable well made with high quality marine grade ply. I did not use a single nail/screw was used and everything is held together with fevicol.

These are available at Jamshedpur. I can possible pack and ship outstation at my cost but due to a very acute personal situation may not be able to do so till the end of this year.

Please note the BOLTON driver is not included as it is now installed in my vehicle. Just the boxes are on offer.

Some pics

UNDER GOING TRIALS
Picture%20033_zpsunhvbyav.jpg


INNARDS
semi_finished_zpsusg1k7jd.jpg


PROFILE
2nd_cost_primer_zpsetol0mlq.jpg


2nd_cost_primer2_zpspwcivxxi.jpg







Hello,
Great steps taken by you to build these.
The enclosure seems to be very neatly built, why not get some proper drivers and give it a try.
If you are not willing to do that, I would be interested in having them, and using something like the drivers you have mentioned with them.

Please reply at your convenience.


PS : I can imagine what they would look after they are finished with maybe matt finish paint or glossy . Sigh and drools.
 
Purchase the Audiolab 6000A Integrated Amplifier at a special offer price.
Back
Top