TheCoolestOne
Active Member
Well we all start as lazy bums in one way or the other and then one day we get bored of our setups and the "kida" starts biting our butt and thats when we feel like experimenting 
Pass B1
- Thread starter sachu888
- Start date
apk
Well-Known Member
Well we all start as lazy bums in one way or the other and then one day we get bored of our setups and the "kida" starts biting our butt and thats when we feel like experimenting
Yes.....quite true. I am kind of revamping my whole setup. Been with my current setup for around 4 years. The 'keda' has definitely bitten hard by now!
sachu888
Well-Known Member
Small correction in price:
Final price for B1 and Power supply kit with TE 47k dual Pot will be Rs 4200.
Regards,
Sachin
Final price for B1 and Power supply kit with TE 47k dual Pot will be Rs 4200.
Regards,
Sachin
darshanjoshi
Active Member
Somehow the word 'cheap' irks me.
So I am always open for something better if the pricing is marginally higher.
I am ok with TE pot also and I did like log control.
Unless you use and hear Regular Pot, TE pot wont sound better.
sachu888
Well-Known Member
R-core transformer
Hi,
I have received few requests for R-core trafo. Omishra can arrange 18-0-18 R-cor for members,minimum quantity is 10.Kindly post your interest here.
Regards,
Sachin
Hi,
I have received few requests for R-core trafo. Omishra can arrange 18-0-18 R-cor for members,minimum quantity is 10.Kindly post your interest here.
Regards,
Sachin
apk
Well-Known Member
Now that we are closing in on the GB and have a decent number, is any of you interested in having a group buy for a case? I remember that there was some discussions with FM Magma regarding making cases for Pass B1 some time ago. Did that work out, and can that option be used in case anyone is interested?
If we see a potential for a case Group Buy, then we can start a new thread for that and keep this one focused on just the B1 kit.
Additionally, all of us will need RCA plugs, some wire (though CAT5 cable can be used for this), spacers, a switch (if you want to use multiple sources). I am assuming that knobs, IEC will be part of the case
I have no idea about switches. Are there locally available ones that will suffice, or do we need to source better quality ones from outside?
Best Regards.
apk
Well-Known Member
What .. another GB? @Sachin I beleive the last kit you gave me had the B1 parts and LS attenuator correct? I will need another B1 to put before the LSA. Without the PSU - I hope the single r-core obtained earlier can power both boards? If yes count me in for just the board.
Thanks
--Rahul
Thanks
--Rahul
apk
Well-Known Member
Guess what buddy! Pass B1 is the new kid on the block!. All present (more than 40, I gather) at the HFV pune meet went ga-ga over this (Om's B1 build).
Many (including me) who haven't even heard the B1 are taking the leap of faith! hope we don't land in soup.
Which pot are you referring to?Unless you use and hear Regular Pot, TE pot wont sound better.
I have made it and listened to it. Don't worry, you will get much more than your money's worth.
Hi Capt,
I too am taking the leap after your opinions and others in the forum. Hope that it will be better than the SSP Pre with 49990,(I think Mr.Omishra is competent to comment on that as also Sachin).
Any way I will retain the best of the two, since my Tube pre is already being cooked, and hope will be served well before this Christmas.:licklips:
N.Murali
I too am taking the leap after your opinions and others in the forum. Hope that it will be better than the SSP Pre with 49990,(I think Mr.Omishra is competent to comment on that as also Sachin).
Any way I will retain the best of the two, since my Tube pre is already being cooked, and hope will be served well before this Christmas.:licklips:
N.Murali
srinisundar
Well-Known Member
Hi Capt,
I too am taking the leap after your opinions and others in the forum. Hope that it will be better than the SSP Pre with 49990,(I think Mr.Omishra is competent to comment on that as also Sachin).
Any way I will retain the best of the two, since my Tube pre is already being cooked, and hope will be served well before this Christmas.:licklips:
N.Murali
Then i am also eagerly waiting for christmas
Trust me you won't regret.
If you want to hear it, I can loan it to you. Only problem is, it doesn't have a cabinet. The one sourced from Magma was supposed to be modded to accommodate wooden side panels supplied by him but the panels cannot be fixed onto the cabinet due to faulty design.
srinisundar
Well-Known Member
You have given the design or magma did it ?
srinisundar
Well-Known Member
Joined here recently...Better if somebody can mention what are the tools necessary can buy that in one go>>
apk
Well-Known Member
Adding to the interest list for r-core (thru Om's contacts) and cabinet (not yet decided which cabinet - magma's, Bibin's, ebay, local etc)
r-core (18-0-18)
1. APK
2. Santy
3. ruenigma
4. Hemantwagde
5. Denom
6. TheCoolestOne (2 Nos)
7. ngd
8. atharva
9. mbhangui
Cabinet
1. APK
2. ruenigma.
3. TheCoolestOne (2 Nos)
4. ngd
5. atharva
6. mbhangui
Pls add on to the list if you are interested.
r-core (18-0-18)
1. APK
2. Santy
3. ruenigma
4. Hemantwagde
5. Denom
6. TheCoolestOne (2 Nos)
7. ngd
8. atharva
9. mbhangui
Cabinet
1. APK
2. ruenigma.
3. TheCoolestOne (2 Nos)
4. ngd
5. atharva
6. mbhangui
Pls add on to the list if you are interested.
Last edited:
Get the Wharfedale EVO 4.2 3-Way Standmount Speakers at a Special Offer Price.
