I would suggest you to wait for the HDFC offer on Flipkart. It usually comes and goes every fortnight.
Xiaomi to launch Mi TV Q1 75" on 23rd March - QLED, 192 Zones, 120Hz
- Thread starter aditya2603d
- Start date
Lobogris
New Member
I have never used any stabiliser for anything. Not for my inverter or regular ACs, not for my 75 inch or 55 inch TVs or anything else.
Never had any issues. Gurgaon is a large city. It is only in very rural areas that you have issues of low or high voltage. Most appliances are quite tolerant to a little voltage change.
Fhir heraperi, must movie
TV was installed today. Its indeed huge and magnificent. I won't belabour on what already is said about the panel.
Now my issue.
I have connected the TV through HDMI to Yamaha 3067, eARC port on TV and HDMI in on 3067 thats also ARC.
However, Firestick 4K is not passing through 3067 to the TV. Firestick is connected to 3067.
What could be the issue.
Now my issue.
I have connected the TV through HDMI to Yamaha 3067, eARC port on TV and HDMI in on 3067 thats also ARC.
However, Firestick 4K is not passing through 3067 to the TV. Firestick is connected to 3067.
What could be the issue.
gpkumaran
Member
Installed- great. Where are you? Lockdown in your place? Mi or fk?
Love4sound
Well-Known Member
The 3067 supports 4k/30. Must be some handshake issues
Gurgaon.. FK. Yes, we are under lockdown.
Could that be the issue with HDMI cable?
I have looked at almost all settings.. am now clueless. I inserted the Firestick directly into TV.. 4K is there, however then the 5.1 audio doesn't reach to 3067 through HDMI.
Love4sound
Well-Known Member
If u have any other device you can connect and check to rule out Hdmi cable issues. What are u playing to check Audio? Check tv audio settings as well as avr.
lightgamer
Well-Known Member
I think you need to connect the HDMI out of the
ARC is for return channel, so I don't think the receiver will support video out with the same port.
An alternative solution will be to connect the firestick to the TV and do ARC/eARC to the receiver.
Last edited:
Love4sound
Well-Known Member
3067 is an AVR
I am able to use Firestick video from my Marantz 7011 to TV without any issue.Hope you have set the HDMI source on tv as HDMI2.
lightgamer
Well-Known Member
That's a typo in the initial statement. I used receiver later in the comment. Anyway, corrected it.
Anyway, the ARC port on any AV instrument isn't necessarily meant to carry video signal. Every soundbar also has a mini receiver built in, so the concept should be the same.
I think, you should connect HDMI out port of the receiver to the eARC port of the TV
Have you enabled the ARC in AVR via the setting menu? Once I forgot to change the source in AVR to FireStick input and ended up spending quite some time fixing it...
vikrantxtrad
Well-Known Member
Congratulations buddy.
Make sure you enable ARC in the settings. It takes more than a week adjusting your TV for the best possible quality and if you are a videophille, you do it for every damn video.
vikrantxtrad
Well-Known Member
Yes, I have connected the HDMI cable to out port of HDMI and to HDMI2 of TV. Only one port HDMI2 that is on supports ARC.
Well, where are the settings on Yamaha 3067 for this. I can't figure that out. TV has settings for ARC and they get enabled once HDMI cable is connected to respective ports.
I am guessing, HDMI cable may be the culprit here. Any recommendations on suitable HDMI cable that I can source from Amazon would be very helpful.
It is supporting the video out, but not 4K.
I tried connecting Firestick directly to TV and do ARC to the receiver. However, the 5.1 audio doesn't reach to 3067 through HDMI.
A beautiful, well-constructed speaker with class-leading soundstage, imaging and bass that is fast, deep, and precise.
