DIY Enclosure/Cabinet for PowerAmp & PreAmp

[rohitmusic]

Will group shipping help reduce shipping costs, as there seem to be multiple members per location.
(We had done this for Pass B1 kit so just asking)

 

[Santy]

Though its worth more than it, honestly, some of us were expecting the price for the cabinet might come down since its a group buy.

bibin,
I do not need DC terminals and I wish there's no hole drilled for it. But still wish to know what purpose exactly it solves? For running on battery or attaching to a better power supply?

 

[vktarun]

Bibin,

Please include my name for complete Set [with all hardware and accessories]

Sorry for delay

Regards,

Vipin

 

[bibin3210]

Will group shipping help reduce shipping costs, as there seem to be multiple members per location.
(We had done this for Pass B1 kit so just asking)

Yes Rohit, it can be considered if all the members from a specific area agrees for group shipping.

Thanks,
Bibin

 

[bibin3210]

Though its worth more than it, honestly, some of us were expecting the price for the cabinet might come down since its a group buy.

bibin,
I do not need DC terminals and I wish there's no hole drilled for it. But still wish to know what purpose exactly it solves? For running on battery or attaching to a better power supply?

Hi Santy,

The sheet metal workshop guy has agreed to give some discount on the final amount. But i don't think it will be a huge discount, because he mentioned like he can give 20% discount for 50+ qty.

I will remove those DC terminals and holes and label for the same. I don't think it will make any difference. I have enough stock of Li-Ion battery with me so decided to power it with that.

Thanks,
Bibin

 

[hydra]

Bibin, if its not too much trouble, could you include me also in the Pass B1 Cab Group Buy as follows:

hydra
a. Cut for Volume/Source selector knobs of size 38mm.
b. Source Labels: 1, 2, 3, 4
c. I don't require the DC terminals on the back panel.
d. Full accessories: Power, Signal & Hardware

I'll pick up the cab from you. I'm from Kochi.

Thanks!

 

[bibin3210]

Bibin, if its not too much trouble, could you include me also in the Pass B1 Cab Group Buy as follows:

hydra
a. Cut for Volume/Source selector knobs of size 38mm.
b. Source Labels: 1, 2, 3, 4
c. I don't require the DC terminals on the back panel.
d. Full accessories: Power, Signal & Hardware

I'll pick up the cab from you. I'm from Kochi.

Thanks!

Hi Hydra (Anup right?)

Sure i will add and the modifications can be done.



Thanks,
Bibin

 

[hydra]

Yes Bibin, it is Anup.

Thank you very much!

 

[jls001]

@bibin: if it's not too late, please include me too with complete accessories and hardware.

Also, do PM me your bank details for payment.

 

[bibin3210]

@bibin: if it's not too late, please include me too with complete accessories and hardware.

Also, do PM me your bank details for payment.

Sure i will do that.

Thanks,
Bibin

 

[jls001]

Guys who are interested in the knobs - please respond to Jayant's query.

I also want to sign up for two knobs, please.

 

[hydra]

...
Guys who are interested in the knobs - please respond to Jayant's query.

I'd like to sign up for the volume and source selector knobs too, please.

 

[bibin3210]

Updated List:


Pass B1 Cabinet GB members
==========================================================

1) apk (Rs. 3465 + Shipping)
a. need all accessories and hardware

2) mbhangui (Rs. 3465 + Shipping)
a. need all accessories and hardware

3) thecoolestone (Rs. 3465 + Shipping)
a. need all accessories and hardware

4) rohitmusic (Rs. 3465 + (Dif. of Acrylic & wooden panel) +Shipping)
a. Wooden Front Panel
b. need all accessories and hardware

5) ruenigma (Rs. 2400 + Shipping)

6) Santy (Rs. 3425 + Shipping)
a. 42mm cut for volume/Source selector knobs
b. need all accessories and hardware except the DC terminals
c. Don't require the DC terminals on the back panel

7) keith_correa (Rs. 3224 + (Dif. of Acrylic & wooden panel) +Shipping)
a. Back plate: Need 5 source inputs - PC, CD, TUNER, TV, AUX
b. Front plate: Need 5 indicators/labels for source - PC, CD, TUNER, TV, AUX
c. Don't require the DC terminals on the back panel
c. Wooden Front Panel

Hardware & Connectors (Cost: 325)
a. Elcom - Power Jack Chassis Mount with 10A Fuse Holder - Qty: 1
b. Rocker Switch - Qty: 1
c. Female Spade Receptacle Connectors - Qty: 10
d. All Hardware

Tools (Cost: 499)
a. Soldron - 25W Soldering Iron
b. Soldron - Soldering Iron Bit
c. Soldron - Soldering Iron Stand
d. Multitec - Adjustable Wire Stripper

8) santnai (Rs. 2725 + Shipping)
a. 42mm cut for volume/Source selector knobs
b. Source Label: Phono,CD,Tuner,Aux
c. Don't require Power Cable and RCA
d. Don't require the DC terminals on the back panel, instead a single 10mm hole with label "Ground".

9) vktarun (Rs. 3465 + Shipping)
a. Need all accessories and hardware

10) Hydra(Rs. 3630)
a. Cut for Volume/Source selector knobs of size 38mm.
b. Source Labels: 1, 2, 3, 4
c. I don't require the DC terminals on the back panel.
d. Full accessories: Power, Signal & Hardware
e. ELCOM power socket with built-in EMI/RFI filter instead of the regular ELCOM power socket

11) jls001(Rs. 3465 + Shipping)
a. Need all accessories and hardware

12) hifipal4all (Rs. 3545 + Shipping)
a. Need all accessories and hardware
b. Don't require the DC terminals on the back panel, instead one more output so total 4 inputs and 2 outputs.

Note: For Wooden Front Panels i will update the cost after completing the work.

Correct me if there is any mistake.

Thanks,
Bibin

 

[omishra]

^^that is huge effort! Preparing that list is too time consuming, hats off!
Bibin you deserve :clapping:

 

[bibin3210]

^^that is huge effort! Preparing that list is too time consuming, hats off!
Bibin you deserve :clapping:

Thank you Mishraji.....You are more experienced and you know it better. A real time eater and very difficult to manage.

Next challenge is the customization, almost all panels need some sort of modifications.....:sad:

Thanks,
Bibin

 

[srinisundar]

Bipin,
Very nice compilation of same. Good to see your dedication on updating/ Like your cabinet you are also professional.. Also very nice support from your end to encourage DIY along with Sachu /Omishra/ Doc.

I have seen some guys just for name sake only tell they do DIY everything..But never seen their efforts in papers. But you guys rock.

 

[ruenigma]

Err Bibin, I need all accessories and hardware. My bad I did not see this thread in the meantime as I was out. Please update it with all accessories and hardware. Will transfer the remaining funds tomorrow

 

[keith_correa]

I have seen some guys just for name sake only tell they do DIY everything..But never seen their efforts in papers.

That's me Actually all my efforts are on paper hyeah:

 

[vktarun]

Hi,
Can some one please help me in locating the post where all the Accessories and Hardware supplied along with the B1 cabinet is listed. I tried but could not get it:sad:

Regards,

Vipin

 

[bibin3210]

Hi,
Can some one please help me in locating the post where all the Accessories and Hardware supplied along with the B1 cabinet is listed. I tried but could not get it:sad:

Regards,

Vipin

http://www.hifivision.com/diy/27797-diy-enclosure-cabinet-poweramp-preamp-16.html#post458892