There are 2 big ticket differences between 2200 and 4200:
Room correction suite (XT vs XT32-Pro)
Preouts (0.2 vs 13.2)
Power wise the difference is just 1dBW extra headroom.
Cheers,
Raghu
DENON Owners thread
- Thread starter RajithKumar
- Start date
There are 2 big ticket differences between 2200 and 4200:
Room correction suite (XT vs XT32-Pro)
Preouts (0.2 vs 13.2)
Power wise the difference is just 1dBW extra headroom.
Cheers,
Raghu
Hi All FM,
I have a Denon avr 2113. My network is not working for some reasons. I have tried all means - like checking with different cables etc but to no effect. Can some one help or share denon customer care number in Delhi? Thanks in advance.
:sad:
I have a Denon avr 2113. My network is not working for some reasons. I have tried all means - like checking with different cables etc but to no effect. Can some one help or share denon customer care number in Delhi? Thanks in advance.
:sad:
My advice, Denon India / PROFX will not give warranty or even repair the AVR if something goes wrong if you buy it from outside India. I brought it from here and facing and still facing some situation. The quality of Denon has come down and it seems it will require repair in 2 - 3 years. I still have no clue how other brand will be.
RajithKumar
Well-Known Member
Its a 4K passthrough receiver ,so definetly it should support 3D too.
Also it supports Audyssey Sub EQ HT in case you have dual subs.
The XT vs XT32 calibration difference was really noticeable for me.
sujitshetty
New Member
I purchased my Denon AVR x2000 in May 2014 from germany and started using it in November 2014. Its now stopped working and when i sent it for repairs they said they Display board has become corroded (in less than 18 months!!) and it will cost me 22K to get it repaired.
.
I now have to make a decision:
I can stretch my budget till 60K provided i can get an extended warranty for atleast 3 years and ideally 4 years.
What would this forum advise between repair and replace. Do any of the top AVR brands offer extended warranty in India? What has been your experience?
. I now have to make a decision:
- Get it repaired and hope no other parts fail anytime soon.
- Buy a new Amp with extended warranty(If thats available). I am told i can get 1500 INR for my current AVR.:annoyed:
I can stretch my budget till 60K provided i can get an extended warranty for atleast 3 years and ideally 4 years.
What would this forum advise between repair and replace. Do any of the top AVR brands offer extended warranty in India? What has been your experience?
Re: Denon 2312CI HDMI board
Yes you are perfectly right. I am having a Denon AV X1000 for my second room and after two years of perfect service, I got it updated. The updation fail midway and now to replace the board, Denon has asked me to pay 24k which is absolutely ridiculous. He said you rather buy a new one.
Yes you are perfectly right. I am having a Denon AV X1000 for my second room and after two years of perfect service, I got it updated. The updation fail midway and now to replace the board, Denon has asked me to pay 24k which is absolutely ridiculous. He said you rather buy a new one.
I purchased my Denon AVR x2000 in May 2014 from germany and started using it in November 2014. Its now stopped working and when i sent it for repairs they said they Display board has become corroded (in less than 18 months!!) and it will cost me 22K to get it repaired.
I now have to make a decision:
- Get it repaired and hope no other parts fail anytime soon.
- Buy a new Amp with extended warranty(If thats available). I am told i can get 1500 INR for my current AVR.:annoyed:
I can stretch my budget till 60K provided i can get an extended warranty for atleast 3 years and ideally 4 years.
What would this forum advise between repair and replace. Do any of the top AVR brands offer extended warranty in India? What has been your experience?
Please go for new one......there is no guarantee and warranty for repairs.
sujitshetty
New Member
Thank you for your advise. Do any of the AVR brands provide extended warranty in India. I am willing to switch to Yamaha or Pioneer if that helps but would prefer to stick to Denon.
Hi folks,
I have Himedia Q5 mediaplayer and Denon x1200w AVR with 5.1 setup. When I am trying to play Dolby Atmos (5.1.2) content... nothing happening. As I expected it should play. But not playing!! Exactly I don't know what is the reason... may be my setup is 5.1 channel. If my setup is 7.1 or 5.1.2 it will play. Is it correct? or any other problem with my setup?
I have Himedia Q5 mediaplayer and Denon x1200w AVR with 5.1 setup. When I am trying to play Dolby Atmos (5.1.2) content... nothing happening. As I expected it should play. But not playing!! Exactly I don't know what is the reason... may be my setup is 5.1 channel. If my setup is 7.1 or 5.1.2 it will play. Is it correct? or any other problem with my setup?
Srih
New Member
Dear denon owners is it ok to go for x1200w.? concerns are reliability (heat/burn issues) and sound quality.
nitinsanand
Active Member
Heat burn isn't an issue if you give enough room for ventilation/circulation. It's a good value for money product, you should get around 15% discount on mrp. With regards to sound quality its a very good option for HT in that budget today, not the best if it's for music. Take a demo and then decide amongst peer group
Even we have 2.1 setup, we can play the 5.1 content. But as per you its must and should 7.1/5.1.2 for ATMOS!!! Fine... thank u
I am using x1200w for two months. No problems found... every thing going fine. I am enjoying my HT.
you can play Atmos content even with 5.1 or 7.1. The receiver will happily decode the signal for you but the unless you have the additional Atmos speakers (5.1.2/4, 7.1.2/4), you will not experience the intended results.
So my 1st question once again.....
I have x1200W AVR which one supports the ATMOS. But my speaker setup only 5.1. When I am trying to play 7.1 channel audio Dolby ATMOS movie, sound completely not playing!
Check out our special offers on Stereo Package & Bundles for all budget types.
